GFC Technology CO2 Gas Analyzer Ppm Range 10ppm Lowest

CO2 Gas Analyzer Ppm Range ,10ppm Lowest ,GFC Technology

The CO2 NDIR gas analyzer is mainly composed of infrared sensor (light source, gas absorption cell, detector), data acquisition unit, signal interface board, control circuit, power supply and other parts.

Light Source: Imported infrared light source, good stability.

Gas Cell: The sample gas passes through the gas cell, and the substance to be measured absorbs the corresponding wavelength.(Characteristic absorption)of infrared light will be absorbed.

Detector: Based on the principle of infrared, by detecting the unique absorption spectrum of gas, it can make accurate quantitative analysis and calculate its concentration value.

CO2 Sensor:based on(NDIR) Non-dispersive infrared absorption method detectionCO2gas.

Control Signal Board:Multi-channel relay control signal output,I/OSignal input, current signal output control, etc.

AC220VPower Outlet: Instrument power supply input interface.

Switching power supply: AC to DC conversion, power supply module for each unit of the analyzer.

Air Intake:Sample gas or calibration gas inlet.

Air Outlet:exhaust vent.

Filter: PTFE membrane particle filter, precision filtering of sample gas dust.

Touch Screen:Displays instrument status, concentration and other data information, and also provides operation functions.

• Ambient temperature: (0~45) ℃.
• environment humidity:(0~95)%RH, no condensation.
• Relative pressure: (86~106)kPa.
• Working power supply and power consumption:AC(220±22)V,50Hz±1Hz;Power consumption: ≤60W.
• Applicable environment: No significant vibration or impact situations; non-explosion-proof situations.