Gas Analyzer Accessories Gas Cooler Dual-Channel Gas Condenser For CEMS Applications
Here are some of the key accessories used with gas analyzers:
- Sample Probe - Extracts a representative gas sample from the source like a stack or process pipeline. Typically made of stainless steel.
- Sample Line - Transports the sample gas to the analyzer. Stainless steel or non-reactive tubing like PTFE. Can be heated to prevent condensation.
- Particulate Filter - Removes dust, soot and other particles that can contaminate the analyzer. Use high efficiency filters like PTFE membrane.
- Moisture Removal - Uses condensation, absorption media like Nafion dryers, or permeation tubes to remove moisture. Protects analyzer.
- Sample Pump - Draws the gas sample through the system at a controlled flow rate optimal for the analyzer. Diaphragm and rotary vane pumps used.
- Calibration Gas - Cylinders of known concentration gases used to calibrate the analyzer for accurate measurement. Traceable to standards.
- Gas Regulators - Used to control the flow and pressure of calibration gases into the analyzer during calibration.
- Data Logger - Records analyzer outputs like gas concentrations, temperature, pressure. Can interface to plant control systems.
- Flow Meters - Measure total and individual gas flow rates in the sampling system. Help set optimal flows.
- Heated Enclosures - Maintain analyzer temperature stability in cold environments to minimize drift.
- Alarms - Trigger audible and visible alarms if gases exceed preset concentration thresholds indicating a hazardous condition.
The proper accessories enable continuous, reliable and accurate gas analysis optimized for the specific application.
ESE230 Gas Cooler(Gas analyzer accessories) is a kind of compressed high efficiency moisture removing, used in gas pretreatment system of gas analysis system. It can protect moisture and corresponding corrosion to the gas analyser and guarantee the lifespan lifespan of gas analysers.
Specifications
| Items |
Descriptions |
| Working ambient temperature |
5℃～50℃ |
| Inlet gas temperature |
≤180℃ |
| Inlet gas dew point |
≤80℃(@ 25℃) |
| Outlet gas dew point |
≤4℃(@ 25℃) |
| Condensing control temperature |
Factory set at 3.0℃ |
| Temperature controller fluctuation |
3.0℃±1.0℃(@ 25℃) |
| Condensing method |
fluoride-free compressor |
| Gas condensing pipe |
A+B glass heat exchange pipes, diameter * heightΦ40mm*150mm |
| Inlet gas pressure |
≤3bar |
| Allowed gas differential pressure range |
≤3mbar(gas flow 2NL/min) |
| Gas capacity |
4NL/min |
| Trouble alarm |
Low temperature alarm, deviation alarm, power off alarm; alarm status dry contact output, capacity 250Vac/1A |
| Peristaltic pump |
5r/min |
| withstand voltage testing standard |
AC1500V |
| Leak current |
≤3.5mA |
| Inlet gas connector |
OD6mm |
| Water drainage port |
OD6mm |
| Condensing working temperature |
≤30min |
| Installation method |
Wall-mounted plate installation |
| Power supply |
220VAC 50Hz |
| Power supply consumption |
400W |
| Cabinet size(W×H×D) |
310*280*290mm |
| Cabinet color |
RAL7035 grey |
| Weight |
18kg |
| 4-20mA output |
optional |
